User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Tools needed
- Installation tips
- Assembling your stand
- STEP 1: Screw cam pins onto the drawer front panel
- STEP 2: Install the small wood dowls
- STEP 3: Assembly the drawer back panel and the drawer side panels
- STEP 4: Install the drawer bottom panel
- STEP 5: Install the drawer bottom support
- STEP 6: Install the drawer front
- STEP 7: Install the drawer handle
- STEP 8: Assembling the metal base
- STEP 9: Attach the metal base to the bottom panel
- STEP 10: Prepare the bottom panel assembly
- STEP 11: Prepare the top panel and partition panels
- STEP 12: Prepare the side panels, partition panels, and media shelf
- STEP 13: Attach the partition panels to the media shelf
- STEP 14: Install the media shelf
- STEP 15: Attach the side panels
- STEP 16: Install the back panel
- STEP 17: Install the door stoppers
- STEP 18: Install the top panel
- STEP 19: Secure the back panel to the partition panels
- STEP 20: Fasten the back panel
- STEP 21: Install the door hinges and handles
- STEP 22: Install the doors
- STEP 23: Install the adjustable shelves
- STEP 24: Insert the drawer
- STEP 25: Attach the stopper to the top panel
- STEP 26: Change the door panel
- STEP 27: Position the TV console and install the tipping restraint
- Maintaining your TV console
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
32
STEP 25: Attach the stopper to the top panel
You n ee d :
If you place your TV on top of your console, you must follow these instructions to prevent your TV from tipping. Otherwise,
skip to STEP 27: Position the TV console and install the tipping restraint
on page 34.
If your TV has one stand:
1 Remove the paper backing from the stopper (QQ), then place it in the stopper cut-out template on the top panel (A).
Press down on the stopper (QQ) to help it stick.
2 On the back of the top panel (A), carefully pull out the thumb tacks to remove the stopper template.
If your TV has two stands:
1 On the back of the top panel (A), carefully pull out the thumb tacks to remove the stopper template.
2 Align the template at the position where one of your TV’s stands or one of the feet will be located.
3 Remove the paper backing from the stopper (QQ), then place it in the stopper cut-out template on the top panel (A).
Press down on the stopper (QQ) to help it stick.
4 Repeat this process to attach the second stopper.
QQ Acrylic stopper (2) Pliers
QQ
QQ
QQ
QQ
Stopper backing