User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Tools needed
- Installation tips
- Assembling your stand
- STEP 1: Screw cam pins onto the drawer front panel
- STEP 2: Install the small wood dowls
- STEP 3: Assembly the drawer back panel and the drawer side panels
- STEP 4: Install the drawer bottom panel
- STEP 5: Install the drawer bottom support
- STEP 6: Install the drawer front
- STEP 7: Install the drawer handle
- STEP 8: Assembling the metal base
- STEP 9: Attach the metal base to the bottom panel
- STEP 10: Prepare the bottom panel assembly
- STEP 11: Prepare the top panel and partition panels
- STEP 12: Prepare the side panels, partition panels, and media shelf
- STEP 13: Attach the partition panels to the media shelf
- STEP 14: Install the media shelf
- STEP 15: Attach the side panels
- STEP 16: Install the back panel
- STEP 17: Install the door stoppers
- STEP 18: Install the top panel
- STEP 19: Secure the back panel to the partition panels
- STEP 20: Fasten the back panel
- STEP 21: Install the door hinges and handles
- STEP 22: Install the doors
- STEP 23: Install the adjustable shelves
- STEP 24: Insert the drawer
- STEP 25: Attach the stopper to the top panel
- STEP 26: Change the door panel
- STEP 27: Position the TV console and install the tipping restraint
- Maintaining your TV console
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
30
STEP 23: Install the adjustable shelves
You n ee d :
1 Place the PVC covers (DD) onto the visible cam locks to conceal them.
2 Open the doors (I) and insert four shelf supports (EE) into the holes at the desired height inside each side
compartment. Make sure that you place the four shelf supports at the same level so the shelves are not tilted. Tilt and
rest the adjustable shelves (H) onto the shelf supports.
H Adjustable shelves (2)
DD PVC covers (16)
EE Shelf supports (8)