User Manual
Table Of Contents
- Contents
- IMPORTANT SAFEGUARDS
- Features
- Package contents
- Tools needed
- Installation tips
- Assembling your stand
- STEP 1: Screw cam pins onto the drawer front panel
- STEP 2: Install the small wood dowls
- STEP 3: Assembly the drawer back panel and the drawer side panels
- STEP 4: Install the drawer bottom panel
- STEP 5: Install the drawer bottom support
- STEP 6: Install the drawer front
- STEP 7: Install the drawer handle
- STEP 8: Assembling the metal base
- STEP 9: Attach the metal base to the bottom panel
- STEP 10: Prepare the bottom panel assembly
- STEP 11: Prepare the top panel and partition panels
- STEP 12: Prepare the side panels, partition panels, and media shelf
- STEP 13: Attach the partition panels to the media shelf
- STEP 14: Install the media shelf
- STEP 15: Attach the side panels
- STEP 16: Install the back panel
- STEP 17: Install the door stoppers
- STEP 18: Install the top panel
- STEP 19: Secure the back panel to the partition panels
- STEP 20: Fasten the back panel
- STEP 21: Install the door hinges and handles
- STEP 22: Install the doors
- STEP 23: Install the adjustable shelves
- STEP 24: Insert the drawer
- STEP 25: Attach the stopper to the top panel
- STEP 26: Change the door panel
- STEP 27: Position the TV console and install the tipping restraint
- Maintaining your TV console
- Specifications
- ONE-YEAR LIMITED WARRANTY
www.insigniaproducts.com
29
Console for TVs up to 80”
STEP 22: Install the doors
You n ee d :
1 Align one door (I) to the pre-attached bolts on the two hinges (GG) with the threaded holes on the hinge supports on
the left side panel (C), then secure with a Phillips screwdriver.
2 Repeat the same process to attach the other door (I) to the right side panel (D).
3 Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws on the hinge
arm for a better fit.
Phillips screwdriver