User Guide

39
8 Cu. Ft. Electric and Gas Dryers
www.insigniaproducts.com
OPERATING INSTRUCTIONS
Step 4: Start your dryer
1 Press the Start/Pause button to begin the selected cycle.
2 If you need to pause the cycle (for example to add or remove items or adjust
the load), press the Start/Pause button, then open the door. Your dryer
stops tumbling. When you are ready to start drying again, close the door, then
press the Start/Pause button.
Unloading your dryer
1 When the drying cycle is over, your dryer beeps and then turns off.
2 Open the door and remove the items.
Cleaning the lint filter
1 Gently pull the lint filter out of the slot at the bottom of the drum.
2 Open the tab at the bottom of the filter, and remove the accumulated lint.
3 Close the tab, then insert the filter back into the slot.
CAUTION:
• Do not operate your dryer without the lint filter in place.
• Do not use a damaged or broken lint filter. This may reduce performance or
cause a fire.
Note:
• You should clean the lint filter before every load to shorten the drying time
and to make sure that your dryer is running efficiently.
• If the lint is difficult to wipe away, you can gently wash the filter in mild,
soapy water. Make sure that you rinse all the soap off the filter and that the
filter is dry before you put it back into your dryer.