User Guide

36
www.insigniaproducts.com
OPERATING INSTRUCTIONS
Using your dryer
Control panel
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read
the IMPORTANT SAFETY INSTRUCTIONS
on page 3 before operating this
appliance.
# ITEM DESCRIPTION
1
Cycle
selector
Press to turn your dryer on or off. If your dryer is on for more than
10 minutes without any buttons being pressed, it automatically
turns off.
Turn to select the cycle for the type of load. The cycle you select
determines the heat control for the cycle. The Normal, Bulky, Heavy
Duty, Active Wear, Sanitize, Towe ls, Delicates, and Perm Press
cycles are Sensor cycles. The Quick Dry, Time Dry (20, 30, 40, 50, or 60
min.), Air fluff, and Steam Refresh cycles are Manual cycles. For more
information, see Dryer options and settings
on page 41.
2
Signal
Press to turn the buzzer sound on or off. When turned on, the Signal
indicator lights up. Your selection is kept until you press the button
again.
3
Steam
Press to turn the Steam process on or off. When turned on, the Steam
indicator lights up. This process helps prevent wrinkles and turns on
after the laundry dryness level approaches Normal or above dryness.
4
Digital
display
Sensor cycle: The digital display shows the estimated remaining cycle
time.
Manual cycle: The display shows how long the cycle will run.
5
Cycle
status
display
The Drying, Cooling, Done, and Wrinkle Care indicators light up to
show which step of the cycle your dryer is in. The Clean Filter
indicator lights up at the beginning of a cycle to remind you to clean
the filter.
6
Time
Adjust
/
Press these buttons repeatedly to adjust the drying time for Manual
cycles. (These buttons do not work for Sensor cycles.)