User Guide
Table Of Contents
28
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
2 Connect the cold water supply hose (not included) from the Y-connector to
your washer. Make sure that the hose is snug by hand, then tighten another
2/3 turn with pliers.
3 Connect the straight end of the short inlet hose to the other outlet on the
Y-connector. Make sure that the hose is snug by hand, then tighten another
2/3 turn with pliers.
4 Connect the short inlet hose’s 90° coupling to the brass water inlet on the back
of your dryer. Make sure that the hose is snug by hand, then tighten another
2/3 turn with pliers.
Cold water supply hose (to washer)
Short inlet hose (to dryer)
Water inlet