User Manual

8
INSTALLATION INSTRUCTIONS
www.insigniaproducts.com
Unpacking your dryer
• Unpack your dryer and inspect it for shipping damage. Make sure that you have received all the items shown in
Package contents
on page 5.
• To prevent personal injury or strain, wear protective gloves and use a furniture mover whenever lifting or carrying
your dryer.
Choosing a location
You should locate your dryer where there is enough space at the front for loading the dryer and enough space
behind for the exhaust system.
Your dryer is factory-ready for the rear exhaust option.
Make sure that the room you install your dryer in has enough fresh air and that there are no air-flow obstructions.
WARNING:
• Packing materials can be dangerous to children. Keep all packing materials (such as plastic bags and
polystyrene) well out of the reach of children.
• Do not operate your dryer on the foam base cushion. Doing so will result in serious vibration, which could
cause equipment damage or result in physical injury.
Important to installer:
Read the following instructions carefully before installing the dryer. These instructions should be kept for
future reference.
• The dryer is not suitable for installation in a mobile home.
• Remove the door from all discarded appliances to avoid the danger of a child being trapped and suffocating.
• After unplugging a discarded appliance, cut off the power cord.
• Provisions for introduction of outside air into the dryer room. The free area of any opening for the introduction
of outside air shall not be less than twice the area of the dryer exhaust outlet.
• The back of the dryer must be placed against a wall.
WARNING: Your dryer must be exhausted to the outside to reduce the risk of fire when installed any place inside
the house.