User Manual

18
NS-DD10PDVD19
www.insigniaproducts.com
Using your DVD player
Turning your player on
1 Slide the ON/OFF switch on the side of your player to the ON position.
2 After use, slide the ON/OFF switch to the OFF position.
Playing a DVD or Audio CD
1 Make sure that your player is connected to power.
2 Slide the ON/OFF switch to the ON position.
3 Slide the OPEN switch. The front and back of your player separate to give
access to the disc tray.
4 Place a disc, label side up, in the disc tray, then press the player front and back
together until you hear a click. The disc starts playing automatically.
Controlling DVD or Audio CD playback
• Press (stop) to stop playback. If you press this button once, then press ,
playback resumes playing where it stopped. If you press this button twice,
then press , playback begins at the beginning of the disc.
• Press (play/pause) to pause playback. Press this button again to resume
playback.
• Press (skip forward) or (skip back) to go to the next or previous chapter
or track.
• Press (forward) or (reverse) to fast-forward or fast-reverse on a disc.
Each time you press this button, the speed changes (2x to 4x to 8x to 16x to
32x to normal playback). You can also press to exit fast-forward mode.
Notes:
• Most DVDs and your players have region codes that help control illegal
distribution of DVDs. The region code for your player is 1. You can only play
DVDs with a region code of 1 or ALL. The region code for a DVD is usually
printed on the DVD or the DVD packaging.
• This User Guide explains the basic instructions for operating your players.
Depending on how a DVD is produced, the DVD may have specific or limited
playback features and may not respond to all your commands. THIS IS NOT
A DEFECT. Refer to the instructions accompanying a specific DVD for more
information about the options available on that DVD.
Note: If using the controls on your DVD player, press and hold the buttons to
use the VOL–, VOL+, SETUP, (play/pause), and (stop) functions.