User Manual

www.insigniaproducts.com
8
5 Position the suction cup on the center of the
windshield, below the rearview mirror, then move
the mounting bracket switch clockwise until you
hear a click.
6 Connect the provided USB cable to the MicroUSB
port on your dash cam, then thread the cable from
your dash cam, around the outer edge of the
windshield, and to the area in your car's dashboard
where the 12 V accessory port is located.
7 Plug the cable into the included USB power adapter,
then plug the adapter into the vehicle accessory
port and turn on your vehicle. Your dash cam starts
automatically.
8 Rotate the mounting bracket to adjust the viewing
angle as needed.
Mounting bracket
switch
12V 180W