Quick Start Guide
V2 ENGLISH 22-0165
IMPORTANT SAFETY INSTRUCTIONS
• Always read the safety instructions and User Guide
carefully.
• Do not drop or allow forceful impacts to your dash
cam, or install it in locations exposed to heavy
vibrations.
• Do not disassemble or modify your dash cam in any
way. Disassembly or modication may not only void
the warranty, but may also cause damage.
• Do not use or store your dash cam in damp
locations. Liquid entering your dash cam may cause
damage or lead to res or electric shock.
• Do not operate in extreme heat conditions. If your
vehicle is parked in a hot sunny climate, let your
vehicle cool down before using your dash cam.
• Always read the safety instructions and the
User Guide carefully. Keep the User Guide for future
reference.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289
(U.S. and Canada)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2022 Best Buy. All rights reserved.
FORMATTING AN SD CARD
1 Insert a microSD card into the card slot.
2 Press the Menu button to open the on-screen display
menu.
3 Press
to scroll down the option list and select
Format SD Card, then press OK.
Note: The rst time you insert a new SD card into your dash
cam, the screen prompts you with one of the following error
messages if there is an issue with the card:
• CARD ERROR Replace SD Card - indicates that the
new card is not available to your dash camera (the
card may be incompatible or damaged). Remove the
SD card and replace it with another card. Use SD cards
between 16 and 256 GB.
OR
• CARD ERROR FORMAT Card in Camera - indicates
that the formatting on the new card is not compatible
with your dash camera. This will delete all of the
information on your card, so save your les rst.
TURNING ON YOUR DASH CAM
MANUALLY
• Press and hold the Menu button for three seconds
to turn your dash cam on or o.
Note: If you have an SD card installed and your dash cam
is connected to a vehicle accessory port, it starts recording
automatically when you start your vehicle. You should
review your rst video to make sure that the camera is
positioned correctly and that the video recorded correctly.
SETTING UP YOUR DASH CAM
The rst time your dash cam is turned on, you need to
enter the year, month, day, and time zone, select
Daylight Saving Time (if applicable), and enter the
time. Your dash cam uses these settings when creating
le names and time stamps.
LEGAL NOTICES
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
CAN ICES-3(B)/NMB-3(B)
RECORDING VIDEO WITH YOUR DASH CAM
1 Make sure that your power cable is connected and
the SD card is inserted.
2 After the vehicle is turned on, your dash cam
automatically turns on and starts recording.
3 Press the Menu button to open the Settings menu.
VIEWING VIDEO CLIPS AND PHOTOS
1 Make sure that your dash cam is turned on and in
recording mode.
2 Press the Menu button to open the Setting menu.
3 Select Video Clips, then press OK.
4 Press the up or down button to select a video clip or
photo, then press the OK button.
ADDITIONAL INFORMATION
The User Guide contains information about operating
your dash cam, troubleshooting, and specications.