User Manual

11
2.5 Cu. Ft. Retro Compact Refrigerator
www.insigniaproducts.com
Leveling your refrigerator
Your refrigerator must be level in order to function correctly. If your refrigerator is
not leveled during installation, the door may not close or seal correctly, causing
cooling, frost, or moisture problems.
• Rotate the leveling feet clockwise (to lower) your refrigerator or
counterclockwise (to raise).
Using your refrigerator
Setting the temperature
The refrigerator temperature control has settings from position 1 (the warmest) to
7 (the coldest).
1 The first time you turn your refrigerator on, adjust the control to 4 and let your
refrigerator cool at least four hours before putting food inside. This makes sure
that the cabinet is thoroughly chilled before you put food in.
2 After your refrigerator is fully chilled, test the temperature and adjust towards
1 to make it warmer or towards 7 to make it cooler, as needed. The 4 setting
should be appropriate for home or office refrigerator use.
Note: To make it easier to adjust the feet, have someone push against the top of
your refrigerator to tilt it slightly.
Note:
• If your refrigerator is unplugged or loses power,. wait three to five minutes
before restarting it. If you try to restart before this time delay, your
refrigerator won’t start.
• Large amounts of food lower the cooling efficiency of your refrigerator.
• Do not place the foods on the air outlet and leave spaces for airflow.
• If you change the temperature setting, adjust the temperature control by one
increment at a time. Allow several hours for the temperature to stabilize
between adjustments.
Leveling foot
Counterclockwise
to raise
Clockwise to lower