User Manual
Table Of Contents
- Contents
- Introduction
- Important Safety Instructions
- WARNING
- Features
- Preparing to install your refrigerator
- Setting the thermostat
- Using the freezer compartment
- Reversing the door position
- Maintaining your refrigerator
- Shutting down your refrigerator for extended periods
- Moving Your Refrigerator
- Tips on saving energy
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
14
NS-CF43SS9
www.insigniaproducts.com
12 Install the screw covers previously removed into the holes in the top right of the
refrigerator.
13 Adjust the leveling feet to level the refrigerator.
Maintaining your refrigerator
Your refrigerator is designed for year-round use with only minimal cleaning and
maintenance.
When you first receive it, wipe the case with a mild detergent and warm water, then wipe
dry with a dry cloth. Do this periodically to keep your refrigerator looking new.
1 Turn off the refrigerator and unplug it from the wall outlet.
2 Remove all food.
3 Wash the inside with a damp warm cloth soaked in a solution of one quart of
lukewarm water to two tablespoons of baking soda solution.
4 Be sure to keep the door gasket (seal) clean to keep the refrigerator running
efficiently.
5 Dry the interior and exterior with a soft cloth.
Changing the interior light
1 Hold the lamp cover and push toward the inside of the cabinet to remove it from the
refrigerator compartment.
2 Unscrew the old bulb, then install the new bulb (10W/12E).
3 Re-install the lamp cover.
CAUTION: To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.
CAUTION:
• All parts removed must be saved to reinstall the light bulb.
• Before removing the light bulb, unplug the refrigerator from the power supply.
Failure to do so could result in electrical shock or personal injury.
Top hinge
Screws (2)
Screw
Top hinge
Freezer door
Screws (2)
Door hinge cover