User Manual
Table Of Contents
- Contents
- Introduction
- Important Safety Instructions
- WARNING
- Features
- Preparing to install your refrigerator
- Setting the thermostat
- Using the freezer compartment
- Reversing the door position
- Maintaining your refrigerator
- Shutting down your refrigerator for extended periods
- Moving Your Refrigerator
- Tips on saving energy
- Troubleshooting
- Specifications
- ONE-YEAR LIMITED WARRANTY
13
4.3 Cubic Foot Compact Refrigerator
www.insigniaproducts.com
5 Install the middle hinge on the left side of the refrigerator with the screws you
previously removed. Do not fully tighten the screws.
6 Check the fit and alignment of the door and make sure that it opens and closes freely,
then tighten the screws holding the middle hinge.
7 Install the pivot pin on the bottom-right of the freezer door using the screw you
previously removed.
8 Align the hole in the bottom-right of the freezer door with the top pin in the middle
hinge, then install the freezer door on the hinge pin.
9 Place the top hinge pin into the top of the freezer door, then install the top hinge on
the top left side of the refrigerator with the screws you previously removed.
10 Check the fit and alignment (vertical and horizontal) of the door and make sure that it
moves freely open and closed, then tighten the screws holding the top hinge.
11 Place the top hinge cover over the hinge on the top of your refrigerator, then secure it
with the screw you previously removed.
Screws (2)
Middle hinge
Freezer door
Pivot pin
Screw
Freezer
door