User Manual
Table Of Contents
- Contents
- Introduction
- Indications for use
- Measurement principle
- Important Safety Instructions
- Features
- Learning about blood pressure
- Setting up your blood pressure monitor
- Using your blood pressure monitor
- Maintaining your blood pressure monitor
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
23
www.insigniaproducts.com
Blood Pressure Monitor
Recalling records
1 When the monitor is off, press MEM. The monitor cycles through the
last three records. If there are less than three records, it will show the
latest record instead.
2 If needed, press the user button to switch between User A or
User B’s records.
3 Press the MEM to move forward or SET to move backward through
the records. Press and hold MEM to look over ten records quickly.
Note: The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other records are
pushed back one digit (for example, 2 becomes 3, and so on), and
the last record (250) is dropped from the list.