User Manual
Table Of Contents
- Contents
- Introduction
- Indications for use
- Measurement principle
- Important Safety Instructions
- Features
- Learning about blood pressure
- Setting up your blood pressure monitor
- Using your blood pressure monitor
- Maintaining your blood pressure monitor
- Troubleshooting
- Specifications
- Legal notices
- ONE-YEAR LIMITED WARRANTY
NS-BPMW1
www.insigniaproducts.com
16
Connecting an AC adapter (not included)
1 Make sure that your adapter meets the following requirements:
• Input: AC 100–240 V, 50/60 Hz, 0.2 A max
Output: 6 V, 1 A
2 Connect the AC adapter from the monitor’s DC power jack to a
power outlet.
Attaching the cuff to the monitor
Connect the cuff’s air hose to the air connector plug on the side of the
monitor.
Setting the date, time, and measurement units
Set the clock before using your blood pressure monitor so that a time
stamp can be assigned to each record in its memory.
1 When the monitor is off, press SET. The time is shown.
2 Press and hold SET again to change the year.