User Manual

6
www.insigniaproducts.com
Package contents
•48-can beverage cooler
Removable chrome shelf
User Guide
Components
Setting up your beverage cooler
Before using your beverage cooler
Remove the exterior and interior packing.
Let your beverage cooler stand upright for approximately a half hour before
connecting it to power. This reduces the possibility of a malfunction in the cooling
system from incorrect handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
DO
Place your cooler on a floor, countertop, or cabinet that is strong enough to support it
when it is fully loaded.
Allow 1.6 inches (4 cm) of space on all sides of your cooler to allow for correct air
ventilation.
Place your cooler away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Room temperature below 50° F (10° C) or above
85° F (29.4° C) hinders the performance.
DON’T
Recess or build it in. Your cooler is designed to be free standing only.
Place your cooler in moist areas.
Use your cooler in a garage or any other outside installation.
Leveling feet
Temperature control
Steel bar (to prevent cans
from falling out)
Shelves
Glass door