User's Guide

14
NS-BTST21
www.insigniaproducts.com
While searching, the Bluetooth indicator flashes red and blue.
When connected successfully, the Bluetooth indicator lights solid, and your
turntable sounds a tone.
4 To disconnect from Bluetooth, press and hold the button for five seconds
until the status indicator lights red.
5 To reset Bluetooth, press and hold the button for 10 seconds until the status
indicator lights red and blinks five times.
Listening to music through the RCA jacks
1 Plug the red and white connectors on the included RCA cable into the
L/R AUDIO jacks on the back of your turntable, red to red and white to white.
2 Plug the other end of the cable into your speakers, red to right speaker and
white to left speaker.
Notes:
• If your turntable fails to connect with your speaker, the Bluetooth indicator
lights red. Press the button one more time to reconnect with your
Bluetooth speaker.
• The effective distance between your Bluetooth device and your turntable is
33 ft. (10 m).
• Make sure that you remove any obstacle between your Bluetooth speaker
and your turntable to make sure that the sound is clear.
Bluetooth indicator
RCA audio cable (included)