USER GUIDE Bluetooth Stereo Turntable NS-BTST21 v1 R3 FPO Before using your new product, please read these instructions to prevent any damage.
NS-BTST21 Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting up your turntable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the platter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth Stereo Turntable 8 9 10 11 12 13 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer.
NS-BTST21 19 No naked flame sources, such as lighted candles, should be placed on the apparatus. 20 The symbol with indicates AC voltage. 21 CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Bluetooth Stereo Turntable 1 Make sure that the belt is not twisted, then use your thumb to stretch the belt until it reaches the round hole in the platter. Note: Make sure that you place the belt on the metal track and not on the section with teeth. Round hole Belt 2 3 Still holding the belt, flip the platter over, then insert the platter onto the spindle in the center of your turntable. Align the round hole in the platter with the pulley and use your finger to hook the belt onto the pulley.
NS-BTST21 Attaching and adjusting the counterweight The counterweight on the tone arm adjusts the needle pressure. If the pressure is too much, sound is distorted. If the pressure is too little, track skipping happens more frequently. 1 Hold the counterweight with the black number ring on the counterweight towards you, then slightly push the counterweight into the end of tone arm. When you hear a click, the counterweight has been installed correctly. 5 2.5 0 0.5 1 2.5 Counterweight 0 0.
Bluetooth Stereo Turntable 4 Release the tone arm lock, push the lifting rod forward so that the tone arm leaves the base, then push the tone arm left to the position above the turntable. CAUTION: Make sure that the needle does not contact any part of the of your turntable. Tone arm 5 Turn the counterweight so that the tone arm is horizontal. You can move the counterweight forward or backward on the tone arm. Counterweight 6 Hold the metal counterweight at the back of the tone arm.
NS-BTST21 7 Hold the metal counterweight to keep it from moving, then carefully rotate the front black number ring so that 0 is in the 12 o'clock position. Note: Do not turn the metal counterweight. The black number ring turns separately. 5 2. Metal counterweight 0 0.5 Black number ring 1 8 Hold both the metal counterweight and black number ring together and rotate them counter-clockwise so that 2.5 on the dial is in the 12 o’clock position. This adjustment sets the tone arm to 2.
Bluetooth Stereo Turntable Features • Works with both 33 1/3 and 45 RPM (adapter included) 12-inch records to play a variety of music • High-quality replaceable ATN3600L stylus are durable enough for everyday use • Die-cast aluminum record platter with felt mat supports wobble-free positioning • Removable plastic cover protects your vinyl records from dust and debris • Bluetooth technology with auto connect and memory last audio devices • 3.
NS-BTST21 # ITEM DESCRIPTION 7 Tone arm lifter Push forward and back to raise and lower tone arm. 8 Tone arm rest holder Place the tone arm on this holder with it is not in use. 9 Tone arm Holds the stylus that produces sound from the record. 10 RPM selector switch Turn to select the record type (33 or 45) or OFF to turn off your turntable. (The default OFF.) 11 Bluetooth pairing button 12 Status indicator Press and hold for two seconds to start Bluetooth pairing.
Bluetooth Stereo Turntable Front view # 1 ITEM DESCRIPTION Headphone jack Plug headphones into this jack. If you have a Bluetooth speaker connected, the speaker is not muted. Using your turntable The top cover helps prevent dust from settling on your turntable. We recommend that use the top cover when you are playing records or when not using your turntable. Playing a record 1 Gently open the top cover. Note: Be careful not to pinch your finger when opening or closing the top cover.
NS-BTST21 4 Remove the tone arm-rest holder to release the tone arm. Lock catch Tone arm rest 5 Push the tone arm lifter forward to raise the tone arm. 6 Gently push the tone arm to the left over the turntable. Tone arm 12 www.insigniaproducts.
Bluetooth Stereo Turntable 7 Push the tone arm lifter backward to lower the tone arm so that the stylus touches the record and starts to play. 8 To pause or stop playing, push the tone arm lifter forward to raise the tone arm. Note: When the end of the record is reached, the tone arm and rotation stop. 9 When playing is complete, push the tone arm lifter forward to raise the tone arm, then move the arm back to the tone arm rest. Push the tone arm lifter down to lower the tone arm.
NS-BTST21 While searching, the Bluetooth indicator flashes red and blue. Bluetooth indicator When connected successfully, the Bluetooth indicator lights solid, and your turntable sounds a tone. Notes: • If your turntable fails to connect with your speaker, the Bluetooth indicator lights red. Press the button one more time to reconnect with your Bluetooth speaker. • The effective distance between your Bluetooth device and your turntable is 33 ft. (10 m).
Bluetooth Stereo Turntable 3 Toggle the Phono/Line switch to select the output mode. CONNECTED DEVICE SWITCH POSITION Device with PHONO input PHONO Device without PHONO input LINE Note: The volume knob doesn't adjust the volume of the external speaker when using the RCA cable. Replacing the stylus (Part number: Audio-Technica ATN3600L) The stylus should last about 300 hours under normal use. However, we recommend that you replace the stylus as soon as you notice a change in sound quality.
NS-BTST21 3 Push new stylus upwards until the tip locks into place. CAUTIONS: • Do not remove or bend the stylus. • Do not touch the needle to avoid injury your hand. • Keep out of reach of children. Adjusting the anti-skating control Anti-skating applies a small outward force to the tone arm, counteracting the tendency of the tone arm to move inward toward the center of the record.
Bluetooth Stereo Turntable Cleaning your turntable • Only use a clean, dry cloth. • Never use chemicals, detergents, or abrasives. • When you're not using your turntable, place the dust cap under it to prevent dust or other dirt from getting onto your turntable. CAUTION: Do not spill any liquid on the turntable.This will damage your turntable. If something happens to spill onto the turntable, immediately wipe it clean with a soft, clean cloth.
NS-BTST21 Bluetooth PROBLEM SOLUTION My turntable won’t pair with a Bluetooth device. • Press and hold the (Bluetooth pairing) button for two seconds to make sure that your turntable is switched to transmitting mode. • Make sure that your Bluetooth speaker is turn on and in Bluetooth mode. See the instructions that came with your Bluetooth speaker. • Move your Bluetooth speaker closer to your turntable. Bluetooth pairing failed.
Bluetooth Stereo Turntable Bluetooth Bluetooth version Bluetooth V5.0 Bluetooth supports 2.1+EDR, AFH, HFP, A2DP, ACRCP profiles Bluetooth frequency range 2.402GHz-2.480GHz Operating distance 33 ft. (10 m) www.insigniaproducts.
NS-BTST21 Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Bluetooth Stereo Turntable ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
NS-BTST21 • • • • • • • Connection to an incorrect voltage or power supply Attempted repair by any person not authorized by Insignia to service the Product Products sold “as is” or “with all faults” Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2021 Best Buy. All rights reserved.
