SECURITY CAMERA User Manual
Table Of Contents
- Contents
- Overview
- Before You Begin
- Installation
- Overview of Assembly Procedure
- Mount the HD16
- Connect the Power Cable
- Install the Camera Assembly
- Adjust the Camera
- DIP Switch Functions (Color and TDN Cameras)
- Adjustment Method (Color and TDN Cameras)
- White Balance Adjustment Method (Color and TDN Cameras)
- Manually Setting Shutter Speed (Color and TDN Cameras)
- DIP Switch Functions (WDR Cameras)
- Adjustment Method (WDR Cameras)
- Adjust the Line Lock (Vertical Phase) For External Sync Reference
- Adjust the Backlight Compensation
- Secure the Camera and Dome Enclosure
- Routine Maintenance
- Dome Replacement
- Solving Common Technical Issues
- Service
- Specifications
- Cable Guidelines
- HD16 Model Numbers
Document 900.0345 Rev 1.02 3
03/07
Warnings
Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
WARNING! The use of CSA Certified/UL Listed Class 2
power adapters is required to ensure
compliance with electrical safety standards.
Explanation of Graphical Symbols
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
CAUTION