SECURITY CAMERA User Manual
Table Of Contents
- Contents
- Overview
- Before You Begin
- Installation
- Overview of Assembly Procedure
- Mount the HD16
- Connect the Power Cable
- Install the Camera Assembly
- Adjust the Camera
- DIP Switch Functions (Color and TDN Cameras)
- Adjustment Method (Color and TDN Cameras)
- White Balance Adjustment Method (Color and TDN Cameras)
- Manually Setting Shutter Speed (Color and TDN Cameras)
- DIP Switch Functions (WDR Cameras)
- Adjustment Method (WDR Cameras)
- Adjust the Line Lock (Vertical Phase) For External Sync Reference
- Adjust the Backlight Compensation
- Secure the Camera and Dome Enclosure
- Routine Maintenance
- Dome Replacement
- Solving Common Technical Issues
- Service
- Specifications
- Cable Guidelines
- HD16 Model Numbers
18
Solving Common Technical Issues
Call Honeywell Customer Service for additional assistance (see Service for
contact numbers).
No video
❐ Check that the power supply voltage is within the operating
specifications for your camera model (see Specifications) for
details).
❐ Connect a video monitor directly to the HD16 video output cable to
eliminate video problems that could be caused by other
equipment such as video switches.
❐ Check the video connections to the monitor or CCTV system.
❐ Check for a loose connection at the video camera.
Fuzzy video
❐ Check the video ground connections.
❐ Check for ground loops.