SECURITY CAMERA User Manual
Table Of Contents
- Contents
- Overview
- Before You Begin
- Installation
- Overview of Assembly Procedure
- Mount the HD16
- Connect the Power Cable
- Install the Camera Assembly
- Adjust the Camera
- DIP Switch Functions (Color and TDN Cameras)
- Adjustment Method (Color and TDN Cameras)
- White Balance Adjustment Method (Color and TDN Cameras)
- Manually Setting Shutter Speed (Color and TDN Cameras)
- DIP Switch Functions (WDR Cameras)
- Adjustment Method (WDR Cameras)
- Adjust the Line Lock (Vertical Phase) For External Sync Reference
- Adjust the Backlight Compensation
- Secure the Camera and Dome Enclosure
- Routine Maintenance
- Dome Replacement
- Solving Common Technical Issues
- Service
- Specifications
- Cable Guidelines
- HD16 Model Numbers
Document 900.0345 Rev 1.02 15
03/07
DIP Switch Functions (WDR Cameras)
Figure 11 WDR Camera Switch Settings
Note The Wide Dynamic Range camera has been designed for the best
wide dynamic performance and can only be used with Vari-focal
Auto Iris lens.
Adjustment Method (WDR Cameras)
Switch
no.
Function Off On
1AGC Off On
2 Not used Off On*
3 WDR (Wide Dynamic Range) Off On
4 AWB/ATW ATW AWB
* Leave switch #2 in ON position to ensure the camera functions
properly.
Video monitor
output
Auto Iris level
adjustment. If
necessary, turn
clockwise to
increase brightness
level.
Line-lock
adjustment
AGC
N/U*
WDR
AWB/ATW
Factory (default) settings
= ON (up)
= OFF (down)
Note You may find it helpful
to use the Allen key (supplied)
to access the DIP switches.
* Not used.
Leave in ON
position.