SECURITY CAMERA User Manual
Table Of Contents
- Contents
- Overview
- Before You Begin
- Installation
- Overview of Assembly Procedure
- Mount the HD16
- Connect the Power Cable
- Install the Camera Assembly
- Adjust the Camera
- DIP Switch Functions (Color and TDN Cameras)
- Adjustment Method (Color and TDN Cameras)
- White Balance Adjustment Method (Color and TDN Cameras)
- Manually Setting Shutter Speed (Color and TDN Cameras)
- DIP Switch Functions (WDR Cameras)
- Adjustment Method (WDR Cameras)
- Adjust the Line Lock (Vertical Phase) For External Sync Reference
- Adjust the Backlight Compensation
- Secure the Camera and Dome Enclosure
- Routine Maintenance
- Dome Replacement
- Solving Common Technical Issues
- Service
- Specifications
- Cable Guidelines
- HD16 Model Numbers
Document 900.0345 Rev 1.02 13
03/07
DIP Switch Functions (Color and TDN Cameras)
Figure 10 Color Camera Switch Settings (Vari-focal Auto Iris Lens
Shown)
Adjustment Method (Color and TDN Cameras)
Switch
no.
Function Off On
10 GAMMA Off (0.45) On (1.0)
9 AE (Automatic
Exposure)
Off On (see Manually Setting Shutter
Speed (Color and TDN Cameras))
8 FLON (Flicker Less) Off On
7BLC (Backlight
Compensation)
Off On (Center window)
6 IRIS Control Electronic IRIS Auto IRIS
5 Not used Not used Not used
4 AGC 4 dB 26 dB
Video
monitor
output
* N/U = Not used.
Leave in Off position.
Line-lock phase
adjustment pot
Note You may find it helpful t
o
use the Allen key (supplied) to
access the DIP switches.
Top locking
screw adjusts
focal length.
Bottom locking
screw adjusts
focus.
Push lock
DC Iris
adjust
10 9 8 7 6 5 4 3 2 1
10 9 8 7 6 5 4 3 2 1
GAMMA
AE
FLON
BLC
IRIS
NU*
AGC MAX
AWB1
AWB2
AWB3
Factory (default) settings
Vari-focal Auto Iris
= ON (up)
= OFF (down)