User Manual

11
29-Bottle Wine Cooler
www.insigniaproducts.com
10 Replace the glass door, then reinstall the upper hinge. Make sure that you
align the door and check the tightness of the door gasket.
11 Adjust the leveling feet to level the cooler.
Grounding requirement
This cooler must be grounded. This cooler is equipped with a cord having a
grounding wire with a grounding plug. The plug must be inserted into an outlet
that is properly installed and grounded.
Consult a qualified electrician or service person if the grounding instructions are
not completely understood, or if doubt exists as to whether the cooler is properly
grounded.
Connecting to power
• Plug the appliance into a dedicated, properly installed grounded wall outlet.
This appliance should be operated on a separate electrical circuit from other
operating appliances.
• Plug in and run your cooler for three to four hours before making any
temperature adjustments and before adding wine. This allows your cooler to
reach a stable temperature.
• Do not use an extension cord with this cooler. If the power cord is too short,
have a qualified electrician install an outlet near the cooler. Use of an
extension cord can negatively affect the cooler’s performance.
WARNINGS:
• Improper use of the grounding plug can result in a risk of electric shock.
• Do not, under any circumstances, cut or remove the third ground prong
from the supplied power cord.
CAUTION: This unit is not designed to be installed in an RV or used with an
inverter.
Notes:
• Check your local power source. This cooler requires a 110V-120V, 60 Hz
power supply.
• Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which plugs into a standard
3-prong (grounding) wall outlet to minimize the possibility of electric shock
hazard from this cooler.
• To prolong the service life of the compressor, wait for at least five minutes
before restarting the cooler after a power failure.
Axle sleeve
Hinge cover
Hinge bolts
Upper hinge
Axle sleeve
Rivets