Quick Start Guide

V1 ENGLISH 18-0225
USING THE HEADPHONE JACK
1 Connect headphones or speakers with a 3.5 mm audio cable (not included) into
the headphone jack on the left side of your projector.
2 Press Vol+ and Vol- to adjust the volume.
3 Control playback using the controls on the source device.
IMPORTANT SAFETY INSTRUCTIONS
• Do not drop the projector.
• Do not store or use the projector in an extremely hot area, such as a parked car.
• Do not disassemble or modify the projector.
• Do not block the vents on the side or top of the projector.
• Do not expose the projector to extreme vibrations. It may damage internal
components.
TROUBLESHOOTING
My device does not recognize the projector.
• If using an Android device, make sure that it is HDMI-compatible. Check with
your device’s manufacturer for more information.
• If using an Apple device, make sure that you have connected a digital AV adapter
(with HDMI output).
• Try another video mode. The maximum input resolution is 1080p.
• Disconnect and reconnect the HDMI cable from the source device.
• Turn the source device o and on, then try again.
The image blinks or changes color.
• Reset your projector or connected device.
• The screen may blink if your phone receives a text message or call while it is
connected.
The image dims or turns o.
• Turn o your source device’s screen timeout.
• Turn o your source device, then turn it back on.
• If your projector is not connected to a device, it turns o automatically.
Projector does not display image/video.
• If using a computer, make sure that your display option uses the projector.
• Make sure that your cable connections are correct and secure.
• Make sure that your projector and connected device are fully charged.
• Some apps may not support image projection.
• Check the documentation that came with your device to determine whether it
can display content through HDMI.
Projector does not play sound or is too quiet.
• Turn up the volume on your source device.
• Raise the volume level on your projector.
SPECIFICATIONS
AC ADAPTER INFORMATION:
Input: AC 100-240V, 50/60Hz, 0.6A
Output: DC 9V, 2.0A
For US and Canada market, limited power source (LPS) or Class 2 type adapter
certicated by North America Standards (such as UL 60950-1, CSA C22.2 No.
60950-1, UL1310 and C22.2 No. 223) shall be used.
LEGAL NOTICES
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the FCC
Statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning: The unit must be used with the original accessories.
Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC Statement
CAN ICES-3 (B)/NMB-3 (B)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada)
or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc.
Android is a trademark of Google Inc.
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
Amplier output
Display
LED life
Brightness
Focus
Resolution
Picture ratio
Maximum screen size (diagonal)
Maximum input resolution
Dimensions
Weight
Operating temperature
Humidity
Charging time
Operating time
2W Peak
DLP DMD
20,000 hours (maximum)
50 ANSI lumens (maximum)
Manual focusing dial
WVGA (854 × 480)
16:9
80 in. (203.2 cm)
Up to 1080p
5.7 × 3.15 × 0.9 in. (14.4 × 8.0 × 2.3 cm)
0.5 lbs. (230 g)
32~104°F (0~40°C)
0~80%
3 hours (projector powered o)
100 minutes (average)
NS-PR60_18-0225_QSG_V1_EN.ai 2 5/21/2018 10:48:02 AMNS-PR60_18-0225_QSG_V1_EN.ai 2 5/21/2018 10:48:02 AM