User Manual

Desktop/Dual Desktop Monitor Mount

www.insigniaproducts.com

4 Remove the backing from the pressure plate pad(s) (9), then press it

onto the pressure plate (10).

5 Continue to "Step 3 - Attaching the monitor to the mount" on page 9.

Step 3 - Attaching the monitor to the mount

1 Lay your monitor face-down on a soft, flat surface.

2 Center the monitor plate on the back of your monitor and align the

mounting holes.

Note: Your mount is compatible with monitors with 75 × 75 mm and

100 × 100 mm VESA mounting patterns.

3 Secure the monitor to the mounting plate with four screws (A, B, or the

screws that came with your monitor) and washers (F).

4 If you are attaching your mount to:

• The edge of your desk, see "Step 4 - Option A: Attaching to the

edge of your desk" on page 10.

• A desk grommet hole, see "Step 4 - Option B: Attaching to a

desk grommet" on page 10.

Single-Arm Mount

Dual-Arm Mount