User Manual

7
Desktop/Dual Desktop Monitor Mount
www.insigniaproducts.com
3 Remove the backing from the clamp pad(s) (5) then press onto the
clamp (6).
4 Use two screws (D) and a hex wrench (G) to attach the clamp (6) to the
clamp base support (2). Select the two holes that will hold the mount
to your desk securely. The mount supports desks that are 0.8-4.7 in.
(20-120 mm) thick.
5 Continue to "Step 3 - Attaching the monitor to the mount" on page 9.
Single-Arm Mount
Dual-Arm Mount
5
6
5
6
Single-Arm Mount
Dual-Arm Mount
G
D
6
D
G