User Manual

NS-PGSMM6120-C/NS-PGSMM6220-C

www.insigniaproducts.com

Installing your monitor mount

Note: Make sure that your monitor is compatible with your mount before

installation. See "Compatibility" on page 3.

Step 1 - Selecting a mounting option

• Option A: Attaching the mount to the edge of your desk. See page 6.

• Option B: Attaching the monitor mount to a desk grommet hole. See page

Step 2 - Option A: Assembling the mounting clamp

1 Align the clamp base support (2) with the bottom of the monitor arm

(1), then secure it in place with three screws (

C) using a (G) hex wrench.

Note: Make sure that the screws are flush with the clamp base

support.

2 Remove the backing from the grommet pad (3), then press it onto the

clamp base support (2).

Single-Arm Mount

Dual-Arm Mount

Single-Arm Mount

Dual-Arm Mount