User Manual

11
Desktop/Dual Desktop Monitor Mount
www.insigniaproducts.com
Step 5 - Adjusting the mount tension
Note: If you have a dual-arm monitor (NS-PGSMM6220-C), repeat these
steps for both arms. Single-arm monitor graphics shown.
Vertical tension
• If the mount arm is rising up, use a hex wrench (H) to turn the screw
clockwise.
OR
If the mount arm is sinking down, use a hex wrench (H) to turn the
screw counterclockwise.
Tilt tension
• If your monitor is falling forward, use a hex wrench (H) to turn the
screw clockwise.
OR
If your monitor is hard to tilt forward and back, use a hex wrench (H) to
turn the screw counterclockwise.
Pan tension
• If your monitor is hard to turn left and right, use a hex wrench (H) to
turn the screw counterclockwise.
OR
If your monitor is moves left and right too easily, use a hex wrench (H)
to turn the screw clockwise.
H
H
H