User Manual

10
NS-PGSMM6120-C/NS-PGSMM6220-C
www.insigniaproducts.com
Step 4 - Option A: Attaching to the edge of your desk
1 Align the clamp with your desk, then tighten the knob until the mount
is secure.
Note: If the clamp will not tighten fully, repeat step 4 to move the
clamp to a higher position on the base support.
Step 4 - Option B: Attaching to a desk grommet
1 Thread the bolt (8) through the grommet hole in your desk.
2 Thread the pressure plate (10) through the bolt (8), then secure with
the knob (11).
Single-Arm Mount
Dual-Arm Mount
Desk
Desk
Desk
Single-Arm Mount
Dual-Arm Mount
11
11
Desk Desk