User Manual

www.insigniaproducts.com
28
4 Turn the blower unit 180° so that the fan blade openings are facing out the back of the microwave.
5 Place the blower unit back into the opening. The blower unit exhaust openings should match the exhaust openings on
back of the microwave.
6 Slide the exhaust adapter into the guides on the back of the microwave and push in until it is aligned with the blower
motor screw holes, then secure with the blower motor screws.
7 Secure the blower unit in the microwave with two of the screws you previously removed.
.
Note: Make sure that the damper hinge is at the top and that it can swing freely.
BEFORE
AFTER
Fan blade openings
facing the back
Exhaust adapter
Guides
Blower motor screw
Exhaust adapter
Blower plate