Quick Start Guide

Power switch
Protected
LED indicator
Spaced AC
outlets
Grounded
LED indicator
AC outlets
PACKAGE CONTENTS
• Surge protector
• Quick Setup Guide
OVERVIEW
USING YOUR SURGE PROTECTOR
1 Plug your surge protector into a standard (125V) wall outlet. If the LEDs
don’t light up, make sure that the power switch is in the ON position.
Note: If the protection LED does not turn on, your surge protector cannot absorb
additional power surges or spikes. Replace your surge protector.
2 Plug up to eight devices into the surge protector’s outlets, using the
spaced outlets for bulkier adapters. You may need to push rmly to insert
the plug.
UNDERSTANDING LED INDICATORS
• Grounded LED indicator: Lights when connected to a properly grounded
outlet. If this LED doesn’t light, connect to a dierent outlet or contact an
electrician to inspect your outlet’s wiring.
• Protected LED indicator: Lights to show that your devices are protected
from power surges. If this LED doesn’t light, your surge protector cannot
absorb additional power surges and you must replace your surge
protector.
Before using your new product, please read these instructions to prevent any damage.
Final at size: 11.54 x 9.88 in. (293 × 251 mm)
Final fold size: 5.77 x 9.88 in. (146.6 × 251 mm)
QUICK SETUP GUIDE
8-Outlet
Surge Protector
NS-HW503
FEATURES
• Eight outlets to easily connect your TV and AV components
• 600 joules of surge protection keep your system safe
• 4 ft. (1.2 m) power cord for exible placement
• Sleek black housing matches most modern home theater electronics
• 32 dB EMI/RFI noise ltering prevents interference
NS-HW503_18-0378_QSG_V1_EN.ai 1 7/6/2018 4:45:25 PMNS-HW503_18-0378_QSG_V1_EN.ai 1 7/6/2018 4:45:25 PM
V1
FINAL
FOR PRINT