USER GUIDE Stand for PS4™ Slim/Pro NS-GPS4UVS19 Console not included Before using your new product, please read these instructions to prevent any damage.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setting up your vertical stand. . . . . . . . . . . . . . . . . .
Stand for PS4™ Slim/Pro Package contents • • • • Vertical stand PS4 Slim adapter Mounting screw User Guide Vertical stand (part A) Vertical stand (part B) Mounting screw PS4 Slim adapter www.insigniaproducts.
NS-GPS4UVS19 Setting up your vertical stand CAUTION: • Unplug and remove all cables from your game console before mounting it on the vertical stand. • Perform all work on a flat, firm surface to prevent damage to the vertical stand or your game console. Setting up your PS4 Pro system Note: If you have a PS4 Slim, go to Setting up your PS4 Slim system on page 6. 1 2 Unplug and remove all cables from your game console. Slide the vertical stand parts A and B together.
Stand for PS4™ Slim/Pro 5 6 Using both hands, carefully stand your PS4 Pro game console upside down on a table, with the bottom facing up. Place your stand on the bottom of your console so that the holes line up. Note: The vertical stand has two mounting holes. Use the hole next to the PRO label. Stand bottom Console bottom 7 Secure your stand to the bottom of your console with the mounting screw.
NS-GPS4UVS19 8 Using both hands, turn your console and vertical stand assembly upright, then reattach all cables and plug in your game console. Setting up your PS4 Slim system 1 2 Unplug and remove all cables from your game console. Slide the vertical stand parts A and B together. Make sure that the stand parts are flush with each other. The stand parts only fit together one way. Stand top 3 Remove the mounting screw the bottom of your stand.
Stand for PS4™ Slim/Pro 5 Place your stand on the bottom of your console so that the holes line up. Note: The vertical stand has two mounting holes. Use the hole next to the SLIM label. Stand bottom Console bottom 6 Secure your stand to the bottom of your console with the mounting screw. Tighten the screw with a coin of a flat-blade screwdriver to make sure that your stand is tight against the bottom of your game console. Do not over-tighten the screw.
NS-GPS4UVS19 ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product ("Product"), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product ("Warranty Period").
Stand for PS4™ Slim/Pro • • • • • • Attempted repair by any person not authorized by Insignia to service the Product Products sold "as is" or "with all faults" Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2019 Best Buy. All rights reserved.