User Manual

9
PS4 Universal Vertical Stand
www.insigniaproducts.com
Setting up your PS4 system
1 Unplug and remove all cables from your game console.
2 Remove the rubber locks from the bottom of the vertical stand with
your fingertips.
3 Attach the rubber locks to the stand using the lock that matches the
marking shown in the illustration below.
Note
The vertical base and rubber locks are not symmetrical, so make
sure that you attach the rubber lock that corresponds to the
marking on the vertical base (F to Front).
NS-GPS4UVS18_NS-GPS4UVS18-C_17-0036_MAN_V1_ENG.fm Page 9 Wednesday, February 15, 2017 11:43 AM