User Manual

20
INSTALLATION INSTRUCTIONS
www.insigniaproducts.com
Reversing the dryer door
1 Make sure that the power cord is unplugged.
2 While supporting the door, remove the four hinge screws from the door, then lift the door to remove it and set
the door aside.
3 Remove the screws for the locker cover on the right side of the dryer and the screws for the locker cover on the
left side of the dryer.
4 Install the locker onto the right side of the dryer with the screws you just removed, then install the locker cover
on the left side of the dryer.
5 Remove the screws around the door.
CAUTION: Be careful not to drop the door when removing the screws.
Remove the screws
Remove the screws
Remove the
locker cover
screws
Remove the
locker screws