User Manual

Using the Stroboscopic mode

In the Stroboscopic (Multi) mode, the camera takes a rapid

series of flashes to capture multiple images of a moving

subject in a single photograph.

You can set the firing frequency (number of flashes per

second expressed as Hz), the number of flashes, and the

flash output.

1 Press the MODE button

one or more times to

select Multi

(Stroboscopic mode).

2 Turn the select dial to

choose the flash output

amount you want.

3 Press the SET button to select the flash frequency setting,

then turn the select dial to set the number.

4 Press the SET button again to select the number of

flashes setting, then turn the select dial to set the

number.

MODE ZOOM SYNC SLAV

SET

MODE ZOOM SYNC S

SET

E ZOOM SYNC SLAVE

SET