User Manual

14
NS-BC115SS9/NS-BC115SS9-C
www.insigniaproducts.com
Maintaining your beverage cooler
Your cooler is designed for year-round use with only minimal cleaning and
maintenance.
When you first receive it, wipe the cabinet with a mild detergent and warm water,
then wipe dry with a dry cloth. Do this periodically to keep your cooler looking
new.
Cleaning the interior of your cooler
1 Turn off the cooler and unplug it from the wall outlet.
2 Remove all beverages.
3 Wash the interior with a damp, warm cloth.
4 Clean the door gasket (seal) so the door closes properly.
5 Dry the interior and exterior with a soft cloth.
Defrosting your cooler
The ice build-up on the inner back wall of your cooler will automatically be
defrosted in a compressor-off cycle.
When you press the button, the compressor and circulation fan stops running
while defrosting is in process.
Defrost water will drain out of the cooler, passing through the drain outlet in the
inner back wall into a drain pan located above the compressor. The water will
evaporate from the drain pan on its own.
Storing your cooler
1 Turn off the cooler and unplug it from the wall outlet.
2 Remove all beverages.
3 Clean the cooler.
4 Leave the door open slightly to avoid possible formation of condensation,
mold, or odor.
CAUTION: To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.
Note: It is recommended that you soak your cloth in a baking soda solution
before washing the interior. Mix one quart of warm water and two tablespoons
of backing soda.
WARNING: Make sure that children do not have access to your beverage cooler.
If the door accidentally closes while a child is inside your cooler, the child may
suffocate.