Manualshelf

User's Manual

ManualsBrandsInsideCoach ManualsElectronicsInsideCoach Smart Ball
1
InsideCoach Smart Ball
TM
User Manual
What's included in the package:
1- InsideCoach
TM
Smart Ball
2- Qi Wireless Charging Base
3- Micro USB Cord
Mobile App Compatible with iOS and Android
Charge your smart ball:
Connect the USB cable to the base
and plug into a power source.
Place the ball on the base by aligning
the wireless icon on the ball with the
same icon on the base.
When the red light on the base turns
blue the ball is charging.
Let the ball rest on the base for at
least 2 hours to fully charge.
Do not leave the ball un-attended on the charger. Remove it as soon
as the charge has been completed or after 4 hours whichever comes first.
Storing the ball on the charger is not recommended, unless the charger
has been unplugged from the power source.
Inflate the ball. Do not over inflate the ball or
play with under-inflated ball since this might
damage the ball electronics. Do not subject to
extreme heat. Do not puncture or disassemble.
Do not submerge the ball under water, this will
damage the electronics.
Turning on the smart ball:
Bounce or kick the ball 3-5 times
against a solid surface.
Go to the Games page on your
App, Select a game.
Start playing a game to test your
connection.
Warnings:
-Do not discard in trash, please recycle according with local laws for products containing Li-Ion batteries
-When traveling with or shipping the ball please be aware the ball contains a Li-Ion battery of a capacity not to exceed 600mAH”
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC ID: 2AQNQ-ICSB
Connecng your smart ball to your device ball:
Go to your device settings, Turn on the
Wi-Fi, Find Wi-Fi that starts with IC_xxxx.
Tap on the WiFi with IC_xxxx to connect.
For the first me enter the password:
ic123456 to connect to your ball Wait
for 5-10 seconds to connect Launch the
Inside Coach App
NOTE: The ball is automatically turned
on after it is removed from the base.
Your smart ball goes to sleep after
10 minutes of inactivity.
Troubleshooting: If you don't see a Wi-Fi signal to connect to your ball it means that is not charged. Simply charge the ball.
Engineered and Designed By Inside Coach LLC a U.S.A Company. Web: hp://www.insidecoach.com Contact:info@insidecoach.com
For support please contact your local distributor where you purchased this product. USA Patent: 9662556,
China Patent: 201721690436.3, China Patent: 201820124124.4. Other patents pending.

Summary of content (1 pages)