Installation Guide

Preparing to Install
Tools and materials
• Installation handle
• Ladder
• Round 4.5mm to 6.5mm Cat6A PoE* cable (RJ45 fittings attached)
• Smartphone/device for Inseego Mobile App
• SIM card (4FF Nano)
• Phillips-head screwdriver
• M6 4mm hex driver
• Drill
• 14mm socket wrench/driver
• Ground wire
• Cat6A Ethernet cable
• Sealing/weatherproofing material
Your FW2010 package includes: FW2010 device, PoE injector, and SIM tool.
NOTE: Mount installation packages are ordered and shipped separately.
*Power over Ethernet
2
About the FW2010
Description
The 5G Outdoor CPE FW2010 delivers multi-gigabit data rates over 5G millimeter wave
networks using high power phased array antenna modules. The FW2010 provides
extended range and coverage for millimeter wave cellular networks and delivers data
connectivity to existing in-building networks.
Durability
The FW2010 has an environmental rating of IP67 for water and dust ingress and can
operate within a temperature range of -30°C to 60°C (-22 to 140°F).