Installation Guide

ManualsBrandsInseego ManualsElectronics5G High Performance Sub6 & mmWave Outdoor CPE

1

2

3

4

5

6

7

8

9

Pre-Installation

1. If there is not a pre-installed SIM, unscrew

the protective shield over the SIM slots using

a Phillips-head screwdriver.

NOTE: This device supports only Nano SIM

cards.

2. Use the included SIM tool to insert a Nano

4FF SIM card into the SIM 1 slot.

CAUTION! Do not insert SIM card into the

SIM 2 slot - it will not work.

3. Reattach the protective shield cover to a

torque of 1.2 Nm (0.885 ft/lb).