Installation Guide

Preparing to Install
Tools and materials
• Installation handle (optional)
• Ladder
• Installation PoE* cable (RJ45 fittings attached)
• Smartphone/tablet for Inseego Mobile App
• 4FF nano SIM card (may come pre-installed)
• Phillips-head screwdriver
• M6 4mm hex driver
• Drill
• 14mm socket wrench/driver
• Needle nose pliers or tweezers
• Permanent round Cat6A PoE cable
• Ground wire
• Two RJ45 connector fittings for PoE cable
• Crimp tool to attach RJ45 fittings
• Cat6A Ethernet cable
• Sealing/weatherproofing material
Your 5G FW2010 comes in two packages:
• Device, PoE injector, and SIM tool
• Mounting bracket and hardware
*Power over Ethernet
About the FW2010
Description
The 5G Outdoor Modem FW2010 delivers
multi-gigabit data rates over 5G millimeter
wave networks using high power phased
array antenna modules. The FW2010 provides
extended range and coverage for millimeter
wave cellular networks and delivers data
connectivity to existing in-building networks.
Durability
The FW2010 has an environmental rating of
IP67 for water and dust ingress and can operate
within a temperature range of -30°C to 70°C
(-22 to 158°F).