User's Guide

5G FW2000 CPE USER GUIDE 9
Admin Password
The Admin password is what you use to sign into the 5G FW2000 Web UI. The default Admin password
is Fast5G!.
You should change the Admin password to something easier to remember, and set up a security
question that will help you securely recover your password if you forget what you changed it to.
Important: It is critical that you change the Admin password from the default to keep the device
and your network secure.
Changing the Admin Password
To change the Admin password:
1. Click the down arrow next to Sign Out in the top-right corner of any Web Interface page and
select Change Password.
2. Enter your current Admin password, then enter a new password and confirm it.
3. Select a security question from the drop-down list and type an answer to question in the Answer
field. NOTE: Answers are case-sensitive.
4. Click Save Changes.
The next time you sign in to the FW2000 Web Interface, use the new Admin password. If you cannot
remember the password, click I forgot the Admin password. After you correctly answer the security
question you set up, the current password is displayed.