User's Guide

5G FW2000 CPE USER GUIDE 36
Resetting your Device
You can reset your FW2000 CPE to factory settings using the RESET button on the device or from the
Admin Web UI.
CAUTION! Resetting returns your FW2000 to factory settings, including the Admin password.
Resetting with the RESET Button
The master reset button is in a small hole located in the SIM compartment on the bottom of the
FW2000 device . This button returns the device to factory settings, including resetting the Admin
password
.
To reset the FW2000 from the RESET button:
1. Unscrew the protective shield over the SIM compartment using a Phillips-head screwdriver.
1. Place the RESET end of the provided SIM tool (or one end of an unfolded paper clip) into the
master reset button hole.
2. Press for five to six seconds, then your FW2000 will restart.
3. Check the indicator LED (see Indicator LED on the previous page) to make sure the FW2000 is
working correctly.
4. Reattach the protective shield cover to a torque of 1.2Nm (0.885 ft/lb).