User's Guide
Table Of Contents
- Contents
- 1 Introduction and Getting Started
- 2 Admin User Interface
- 3 Troubleshooting and Support
- 4 Product Specifications and Regulatory Information
- 5 Glossary
5G FW2000 CPE USER GUIDE 22
Inseego Connect Sub Tab
Use this page to enable and configure settings for connection with Inseego Connect. Inseego Connect
is a cloud platform product that provides 360 degree visibility and secure accessibility into your
deployment from a single platform.
Cloud Services
By default, the connection to Inseego Connect is OFF. Slide the ON/OFF slider to ON to enable the
connection.
Status
Connection state: The status of the Inseego Connect connection.
UP – FW2000 is communicating with Inseego Connect servers.
DOWN – FW2000 is NOT communicating with Inseego Connect servers.
Last reported: The time when FW2000 last sent a packet to Inseego Connect servers.
Reporting interval: This is the interval at which your FW2000 will send packets into the Inseego
Connect server. NOTE: A shorter interval means more data usage.
Inseego Mobile App
You can download the Inseego Mobile App from your device’s app store.