User Guide

Customizing Your 5G Indoor Router
Once your 5G Indoor Router is connected to a device that supports web
browsing, you can use the Web User Interface to customize settings,
change your password, and access information.
1. On a device connected to the 5G Indoor Router, open any web
browser and go to http://192.168.1.1.
2. Select Sign In (in the top-right corner of the screen), and enter the
Admin password printed on the bottom of the 5G Indoor Router.
3. The Home Page shows the current Wi-Fi networks and passwords
and lists all currently connected devices. It also shows Internet,
device status, settings, online help and access to the user guide.
Restoring Factory Settings
To restore factory settings, follow these steps:
1. Verify that your 5G Indoor Router is powered on.
2. On the bottom of your router, slide the battery cover to the left
and insert a fingernail at the edge to lift it out of place. Find the
master RESET opening in the compartment.
3. Place one end of an unfolded paper clip into the master RESET
opening and press down for approximately five seconds until the
device resets.
NOTE: When performing the factory reset, any changes made to settings will be lost.