4G/5G Indoor High-Gain Directional Antenna Installation Guide
About Your Antenna The 4G/5G Indoor High-Gain Directional Antenna offers a gain of up to 11 dBi to boost performance for indoor devices. The antenna is designed for high sub-6 bands, 3.3-4.2 GHz.
Installing Your Antenna You can choose to install your antenna on the interior of a window with the window mount sleeve, or anchored with screws on a wall. Window mount installation 1. Place the antenna in the window mount sleeve with the antenna logo towards the suction cups (to face outside) and the Inseego logo facing inside. Antenna icon Inseego logo 2. Attach the suction cups to the interior of a window. NOTE: The antenna must be installed indoors.
Wall mount installation 1. Assemble the wall mount by placing the screw knob in the mount as shown and securing it with the nut. Nut Wall mount Screw knob 2. Screw the wall mount to a wall in the desired location using the M5 screws and wall anchors. NOTE: The antenna must be installed indoors. 3. Screw the antenna onto the wall mount until finger-tight, making sure the antenna icon is facing away from the wall and toward a cellular tower. Antenna icon 4.
© 2021 Inseego Corp. All Rights Reserved.
