Installation Guide

1. Insert four (4) screws (not included) into holes
2. Hook reader onto base.
3. Attach reader to base with base screws (included)
Placing the reader
General Wiring Schematic
Function
Cable Colour
POWER
SUPPLY
CONTROL
PANEL
The 0V reference cable shall be included withing the controller cable.
The 12Vdc power cable shall NOT be included in the controller cable.
Only one power source is connected to the reader at any time.
LED line is low activated
NOTE
50
DRILLING TEMPLATE
SCALE 1:1
DIMENSIONS IN MMS
60