MOBILE PoC RADIO TM-7Plus USER GUIDE Please read this instruction book carefully before using. www.inricosolutions.
Disclaimer This guide is for reference only and the information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Inrico reserves the right to make changes to any products herein to improve readability, function, or design.
Unpacking and Device Checking Please unbox and take out the device and all accessories carefully, and ensure all lists have been gotten before discarding the cardboard box. If any items are lost or damaged in transit, please contact with our distributors.
Handling Precautions Please read the following content carefully. It is very important for device users to gain general knowledge and risks. Operating Voltage Please use within the specified voltage range (12V-24V). Flammable and Explosive Area Do not operate the product in a location containing fuels, chemicals, explosive atmospheres and other flammable or explosive materials. Operating Prohibitions ⚫ Do not use the device in any hazardous areas such as gas, dust, steam, etc.
⚫ Please keep the equipment and accessories dry. ⚫ Please do not use the microwave oven or hair dryer or other heating devices for dry them.
21 22 SIM Card Slot Power Button Press to power on/off Accessories Installation 1. Insert SIM Card Insert SIM card to the the SIM card slot, close the cover and tighten the screws. 2. Attaching the Bracket ⚫ Rotate clockwise and tighten it. ⚫ Rotate counterclockwise to remove it. 3. Plug in DC Power 4.
5. Attaching the Palm Microphone Basic Functions 1. Powering Up and Powering Off the Device Make sure that the power connector is plugged in properly. Power on: Press and hold the power button until the display lighting up. Auto Power On/0ff Button: press to turn on or power off. 2. Unlock the Screen Short press the Hang Up button to lock the screen, and click again to wake up. Pay attention not to press antenna. 3.
6. Personalization Settings Long press any blank space of the main screen to access to personalized settings interface. You can set wallpaper, add widgets, and the system. Icon Removal: Long press the menu in the screen or widget icon, move or delete corresponding icons. 7. Factory Reset Select "Backup & Reset” in the settings menu, and then restore factory settings.
②Release PTT to end the call ③Receive Message 3. Volume Adjustment The radio volume can be adjusted by volume knob or the sliding volume bar. 4. Emergency Operation Press SOS button for 2 seconds to alarm automatically (Defined via APP).
5. Programmable Buttons P1/ P2/ P3/ P4 button can be defined as quick contact or group by users. 6. Exit Press return button to exit and be back to the main interface. Network Connecting 1. WIFI Connecting Turn on the device, click “Settings ” → WIFI. Select the wireless network and enter the password to connect.
2. Cellular Network Connecting Open “Settings”, tap on ‘SIM Cards’, select the one that you need to connect.
3.
Basic Troubleshooting If your device shows following problem during operating, please check the instruction as below. If problems can’t be solved, please contact local authorized service. Problems Terminal Crash Buttons Not Working White Screen Error Echo or Noise During Connecting Unable to Locate Unable to Detect SIM Card Poor Reception Solutions Too much APPS on processing. - Force some programs to quit or restart the terminal. The buttons may not work temporarily, restart the terminal.
Shorter Standby Time The battery life becomes shorter in high temperature environment. - Replace a new qualified battery. Power consumption increased in areas with weak signal. - Please temporarily turn off the device. The SIM card cannot work properly or cannot be used. - Make sure the SIM card has a balance instead of arrears. The mobile network not available. - Select SIM card network, and contact the operator to activate the cellular network.
