User's Manual

TagBoard
2.4.4 CAN Ports
DDT-A
Number
3
Type
3 CANopen Master/Slave selectable
Signals
CANH, CANL, GND
Insulation
CAN interface circuits and +5 Vdc supply for CAN are optically
insulated from CPU
Format
CAN V2.0b physical layer for high-speed connection compliant
Data
in according CANopen CIA DS301
Address selection
1 channel is determined by dip-switch
Stub
121 ohm hardware selectable
2.4.5 Status Indicators
DDT-A
CAN status
green and red leds, in according with CAN indicator specification
DR303-3
NAND status
Solid red when NAND is used
Power ON
Solid green when power on
PIC status
Flashing red when Co-processor is operating
ACM matrix
Customizable 5x7 led dot matrix
2.4.6 Protections
DDT-A
Reverse polarity logic circuit, serie diode
power circuit, serie diode
Short circuit logic circuit, 500mA fuse
2.4.7 Mechanical & Environmental
DDT-A
Size (L x W) 160 x 114 mm
Height 15 mm
Weight 161 g
Ambient temperature 0 to +45 ºC operating, -40 to +85 ºC storage
Humidity 0 to 95%, non condensing
Sirius Electronic Systems s.r.l. 9