User's Manual

TagBoard
The connectors are distributed on the perimeter of the card occupying two sides. All coomunication
ports are located on the long side of the card, while the power supply connector is located laterally.
2.9.1 CON8 - Power supply
12345
678910
Figure 2.10: MICROFIT 3.0 430451000
pin name type description
1 comune - 0V power supply reference
2 24V IN 24V power supply
3 GND - ground
4 NC - not connected
5 WDO - OUT negative side watchdog
6 comune - 0V power supply reference
7 24V IN 24V power supply
8 GND - ground
9 NC - not connected
10 WDO + OUT positive side watchdog
2.9.2 CON10 - Serial ports
1 2 3 4 5
6 7 8 9
1 2 3 4 5
6 7 8 9
CON10-B
CON10-A
Figure 2.11: DSUB 9 PINS
Sirius Electronic Systems s.r.l. 17