User's Manual

Doc.: HD0389-00-Manuale_TL_GWCxxxx_r.0.1_EN.doc-00 17/04/2011 Page 40 of 49
4. Controller start up
This section provides information on how to startup GWC controller.
User should:
 check the installation
 provide GWC controller maintenance.
4.1. Check the installation
Before
starting it
up
• Please check that GWC device version is the correct/desired
one;
• Please check that controller setup satisfies software application
requirements;
• Please check that wiring and mounting have been performed in
the correct way.
4.2. Maintenance
GWC device is designed to reduce maintenance operations to the
minimum, such as regular removal of dust from heat sinks by mean of
filtered, dry and low pressure air flow.
4.3. Signals and working conditions
Signals
GWC device current state/operating condition is displayed by mean of a
7-segment display.
Please refer to software manual for the specific application signals
meaning.
i